Rogue Ap Screen - ZyXEL Communications NWA-3166 User Manual

Chapter 15 Rogue AP Detection

15.2.2 Rogue AP Screen

Use this scren to display details of all wireless access points within the NWA's
coverage area. Click Rogue AP > Rogue AP. The following screen displays.
Figure 101 Rogue AP > Rogue AP
The following table describes the labels in this screen.
Table 51 Rogue AP > Rogue AP
LABEL
Rogue AP List
Refresh
Index
Active
MAC Address
SSID
Channel
Radio Mode
Security
Last Seen
Description
164
DESCRIPTION
This displays details of access points in the NWA's coverage area
that are not listed in the friendly AP list (see
page 163)
Click this button to have the NWA scan for rogue APs.
This is the index number of the AP's entry in the list.
Use this check box to select the APs you want to move to the
friendly AP list (see Section 15.2.1 on page
This field displays the Media Access Control (MAC) address of the
AP. All wireless devices have a MAC address that uniquely
identifies them.
This field displays the Service Set IDentifier (also known as the
network name) of the AP.
This field displays the wireless channel the AP is currently using.
The field displays the radio mode the AP is currently using.
This field displays the type of wireless encryption the AP is
currently using.
This field displays the last time the NWA scanned for the AP.
If you want to move the AP's entry to the friendly AP list, enter a
short, explanatory description identifying the AP before you click
Add to Friendly AP List. A maximum of 32 alphanumeric
characters are allowed in this field. Spaces, underscores (_) and
dashes (-) are allowed.
Section 15.2.1 on
163)
NWA-3166 User's Guide