Activate The Voip Profile; Configure The Guest Network - ZyXEL Communications NWA-3166 User Manual

Chapter 3 Tutorials

3.3.2.2 Activate the VoIP Profile

You need to activate the VoIP_SSID profile before it can be used. Click the
Wireless section. In the Select SSID Profile table, select the VoIP_SSID
profile and click Apply.
Figure 22 Tutorial: Activate VoIP Profile
Your VoIP wireless network is now ready to use. Any traffic using the VoIP_SSID
profile will be given the highest priority across the wireless network.

3.3.3 Configure the Guest Network

When you are setting up the wireless network for guests to your office, your
primary concern is to keep your network secure while allowing access to certain
resources (such as a network printer, or the Internet). For this reason, the pre-
configured Guest_SSID profile has layer-2 isolation and intra-BSS traffic blocking
enabled by default. "Layer-2 isolation" means that a client accessing the network
via the Guest_SSID profile can access only certain pre-defined devices on the
network (see
the client cannot access other clients on the same wireless network (see
8.1.2 on page
42
Section on page 146), and "intra-BSS traffic blocking" means that
98).
Section
NWA-3166 User's Guide