5.3 What You Need to Know
See
Chapter 8 on page 34
point.
5.4 Setting your WAP6405 to AP Mode
To use your WAP6405 as an access point, see
1
Connect your computer to the LAN port of the WAP6405.
2
Open a web browser such as Internet Explorer and type "http://192.168.1.2" as the web address in
3
your web browser.
Note: If you use the static LAN IP address to access the WAP6405's web configurator,
make sure your computer's IP address is in the range between "192.168.1.3" and
"192.168.1.254".
Enter "1234" (default) as the password and click Login.
4
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
5
5.4.1 Configuring your WLAN, LAN and Maintenance Settings
• See
Chapter 11 on page 56
wireless network and LAN settings.
• See
Chapter 13 on page 71
5.5 AP Mode Status Screen
Click
to open the Status screen.
Chapter 5 Access Point Mode
for a tutorial on setting up a network with the WAP6405 as an access
Section 3.1.2.1 on page
and
Chapter 10 on page 53
for information on configuring your Maintenance settings.
WAP6405 User's Guide
23
17.
for information on the configuring your