ZyXEL Communications NWA-3166 User Manual page 173

The following table describes the labels in this screen.
Table 54 Remote Management: WWW
LABEL
WWW
Server Port
Server Access
Secured Client
IP Address
HTTPS
Server
Certificate
Authenticate
Client
Certificates
Server Port
Server Access
Secured Client
IP Address
Apply
Reset
NWA-3166 User's Guide
DESCRIPTION
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the NWA
using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA using this service.
Select the Server Certificate that the NWA will use to identify itself.
The NWA is the SSL server and must always authenticate itself to the
SSL client (the computer which requests the HTTPS connection with the
NWA).
Select Authenticate Client Certificates (optional) to require the SSL
client to authenticate itself with the NWA by sending the NWA a
certificate. To do that the SSL client must have a CA-signed certificate
from a CA that has been imported as a trusted CA on the NWA (see the
appendix on importing certificates for details).
The HTTPS proxy server listens on port 443 by default. If you change
the HTTPS proxy server port to a different number on the NWA, for
example 8443, then you must notify people who need to access the
NWA web configurator to use "https://NWA IP Address:8443" as the
URL.
Select a NWA interface from Server Access on which incoming HTTPS
access is allowed.
You can allow only secure web configurator access by setting the HTTP
Server Access field to Disable and setting the HTTPS Server Access
field to an interface(s).
A secure client is a "trusted" computer that is allowed to communicate
with the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 16 Remote Management Screens
173