There is no explicit message from CIFS that tells users their volume is
degraded or down.
5.4 Editing a Volume
Click an internal volume's Edit icon in the Storage screen as shown in
to open the following screen. Use this screen to change the volume's name.
Figure 93 Storage > Edit
The following table describes the labels in this screen.
Table 18 Storage > Edit
LABEL
Volume Name
Apply
Cancel
NSA-220 Plus User's Guide
DESCRIPTION
For an internal volume, type a volume name from 1 to 31 characters. To
avoid confusion, it is highly recommended that each volume use a unique
name.
Acceptable characters are all alphanumeric characters and " " [spaces],
"_" [underscores], and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
For an external volume, type a volume name from 1 to 32 single-byte (no
Chinese characters allowed for example) ASCII characters. The name
cannot be the same as another existing external volume.
Click this to save your changes and rename the volume.
Click this to close this screen without saving your changes.
Chapter 5 Storage
Figure 90 on page 87
91