The Configuration Screen; The Firmware Upgrade Screen; Figure 148 Maintenance > Configuration; Table 60 Maintenance > Configuration - ZyXEL Communications NSA-220 PLUS User Manual

Chapter 11 Maintenance Screens
Table 59 Log Messages (continued)
CLASS
Users
Users
Users
Users
Users
Users
Users

11.5 The Configuration Screen

Click Maintenance > Configuration to open the following screen. Use this screen to back up
or restore the NSA configuration settings and enable or disable the hardware reset button.
Figure 148 Maintenance > Configuration
The following table describes the labels in this screen.
Table 60 Maintenance > Configuration
LABEL
Backup Current Configuration Settings
Backup
Restore Configuration
Browse
Restore

11.6 The Firmware Upgrade Screen

Click Maintenance > FW Upgrade to open the following screen.
178
SEVERITY MESSAGE
INFO User %s from %s has been logged out (lease timeout)!
NOTICE Add new user %s by %s from %s.
NOTICE Change user %s's password.
NOTICE Delete user %s by %s from %s.
NOTICE The user %s from %s has attempted to change the user %s
password but old password verification fail.
NOTICE User %s on %u.%u.%u.%u has been denied access from %s
NOTICE User %s password has been changed by %s from %s.
DESCRIPTION
Click this to save the current configuration of the NSA to your computer. A
pop-up screen appears asking you to confirm. Click OK to continue or
Cancel to quit.
After you restore a configuration, if a share path does not exist, then it
appears be in red.
Click this to locate a previously-saved configuration file.
Click this to load the previously-saved configuration file to the NSA. This
replaces your current NSA configuration settings with the settings in the
previously-saved configuration file.
A pop-up screen appears asking you to confirm. Click OK to continue or
Cancel to quit.
NSA-220 Plus User's Guide