Table of Contents
Advertisement
Chapter 11 Spanning Tree Protocol
Figure 45 Advanced Application > Spanning Tree Protocol
Select the STP mode you want to configure on the Switch.
11.3 Configure Rapid Spanning Tree Protocol
Use this screen to configure RSTP settings, see
on RSTP. Click RSTP in the Advanced Application > Spanning Tree Protocol screen.
Figure 46 Advanced Application > Spanning Tree Protocol > RSTP
The following table describes the labels in this screen.
Table 23 Advanced Application > Spanning Tree Protocol > RSTP
LABEL
Status
Active
100
DESCRIPTION
Click Status to display the RSTP Status screen (see
Select this check box to activate RSTP. Clear this check box to disable RSTP.
Section 11.1 on page 95
for more information
Figure 47 on page
ES-2024 Series User's Guide
102).
Advertisement
Table of Contents
