Snmp Configuration; Figure 16-6 Smt: Snmp Configuration; Table 16-1 Smt: Stp Per Port Setting - ZyXEL Communications Dimension ES-2008 User Manual

Ethernet switch
Table of Contents

Advertisement

Dimension ES-2008 Ethernet Switch
FIELD
Port
This read-only field displays the port number on the switch.
State
This read-only field displays the state of the port. The state can be
Forward, Disable, Blocking, Learning and Listening.
Path Cost
Enter a number between 1 and 65535 in the Path Cost field. The smaller
the number the lower the path cost is for the port.
Priority
Enter a number between 0 and 255 in the Priority field. The smaller the
number, the higher the priority.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.

16.3 SNMP Configuration

Refer to the SNMP chapter for more information on SNMP.
To configure SNMP, use the menus in the SNMP Configuration screen as shown next.
Tab=Next Item
16.3.1 System Options
Use the System Options screen to set up system parameters for SNMP.
16-4

Table 16-1 SMT: STP Per Port Setting

Intelligent Switch : SNMP Configuration
===================
System Options
Community Strings
Trap Managers
Previous Menu
Configure the system information.
BackSpace=Previous Item

Figure 16-6 SMT: SNMP Configuration

DESCRIPTION
Enter=Select Item
Protocol Related Configuration

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents