Port Mirroring - ZyXEL Communications Dimension ES-2008 User Manual

Ethernet switch
Table of Contents

Advertisement

Dimension ES-2008 Ethernet Switch
FIELD
Type
Enabled
Auto Negotiation
Speed/Duplex
Config
Flow Control
Group
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
The Type field for port 9 varies depending on your switch model.

15.2 Port Mirroring

The port mirroring feature allows you to monitor port traffic on the switch. Refer to the
Port Mirroring chapter for more information.
Select Port Mirroring Configuration and press [ENTER] to display the screen as shown
next.
15-2
Table 15-1 SMT: Port/Trunk Configuration
This read-only field displays the type of the port: 10/100TX for Ethernet
ports or 100FX for the fiber port.
Press [SPACE BAR] and [ENTER] to select Yes to activate the port.
Press [SPACE BAR] and [ENTER] to select Enabled to activate the
auto negotiation feature on the port.
Press [SPACE BAR] and [ENTER] to select one 10 Half, 10 Full, 100
Half or 100 Full to set the speed and duplex mode of the port.
Press [SPACE BAR] and [ENTER] to select On to activate the flow
control feature on the port.
Press [SPACE BAR] and [ENTER] to select a trunk group this port
belongs to. Trunk group choices are Trunk1, Trunk2, Trunk3 and
Trunk4.
DESCRIPTION
Switch Configuration

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents