Vx-2Dcx Lens Replacement - Runco Video Xtreme VX-2cx User Manual

Maintenance and Troubleshooting
VX-2dcx Lens
Replacement
9. Replace the foam lens shield.
10. Reattach the front lens bezel by sliding the
top down onto the two retaining dowels.
11. Tighten the Phillips screw on the bottom of
the bezel to secure it.
➤
Figure 5-1 shows the VX-2dcx lens assembly.
Motor Assembly
9/64" Hex Screw (6x)
for Mounting Lens
Figure 5-1. VX-2dcx Lens Assembly Exploded View
Projector Front Jewelry
64 Runco VX-2cx/VX-2dcx Owner's Operating Manual
Motor Assembly
Electrical Connector
and Harness
Front of Lens