Adjust The Anamorphic Lens - Runco Video Xtreme VX-2cx User Manual

Installation
Adjust the Anamorphic
Lens
➤
Adjusting the Horizontal (X) Lens Position:
1. Project a white field on the screen.
2. Loosen the Yaw/X-Adjustment Levers (item #10a) underneath the lens.
3. Slowly move the anamorphic lens into place so that there are no shadows on either
side of the screen:
Too Far Left
Too Far Right
4. When the horizontal position is properly set, tighten the Yaw/X-Adjustment Levers to
secure the lens in place.
Adjusting the Height (Y): With the white field still on-screen, loosen the Pitch
Adjustment Levers (item #8) and Y-Adjustment Levers (item #9) on either side of the lens.
Then, slowly move the anamorphic lens into place so that there are no shadows on the
top or bottom of the screen:
Too Low
Too High
When the height is properly set, tighten the levers to secure the lens in place.
42 Runco VX-2cx/VX-2dcx Owner's Operating Manual
Correct position
Correct position