Lens Replacement - Runco VX-6000d Owner's Operating Manual

Maintenance and Troubleshooting
5.2

Lens Replacement

Downloaded From projector-manual.com Runco Manuals
Figure 5-1 shows the VX-6000d lens assembly.
Motor Assembly
9/64" Hex Screw (6x)
for Mounting Lens
Figure 5-1. VX-6000d Lens Assembly Exploded View
Only trained, authorized Runco dealers should attempt to
Note
remove or replace a lens. Please read this procedure
carefully before doing so.
Lens replacement is normally performed at the Runco factory. Field
replacement of lenses is generally only required if the projector is
re-installed in a new location or the lens has been damaged.
1. Remove the Projector Front Jewelry by
loosening the captive #2 Phillips screw
below the lens.
74
Front of Lens
Projector Front Jewelry
Runco VX-6000d Owner's Operating Manual
Motor Assembly
Electrical Connector
and Harness