Runco Video Xtreme VX-2cx User Manual page 20

Controls and Functions
6. LAMP COVER
Remove this cover to access the lamp compartment.
7. UP BUTTON
Used to move the menu cursor up in the VX-2 menu system.
8. LEFT BUTTON
Used to move the menu cursor left in the VX-2 menu system.
9. DOWN BUTTON
Used to move the menu cursor down in the VX-2 menu system.
10. ENTER BUTTON
When an item is highlighted on the On-Screen Display, the ENTER button selects the
item.
11. RIGHT BUTTON
Used to move the menu cursor right in the VX-2 menu system.
12. MENU BUTTON
Pressing the MENU button brings up the main VX-2 menu. Also, if you are in an
adjustment mode or function, pressing MENU brings the menu back one level.
The VX-2 has its own internal menu system, separate from that of
Note
the DHD Controller. However, it is intended for use by trained
service personnel only.
13. POWER INPUT (100 to 240 VAC)
Connect the VX-2 to power here.
14. MAIN POWER SWITCH
Disconnects or applies power to the VX-2.
8 Runco VX-2cx/VX-2dcx Owner's Operating Manual