Runco Video Xtreme VX-2cx User Manual page 83

Table 6-1. Serial Commands (continued)
Parameter
Command
(min/max)
BRIGHTNESS -100/100
BRIGHTNESS? NA
CHROMADELAY -12/12
CHROMADELAY? NA
COLOR -100/100
COLOR? NA
CONTRAST -100/100
CONTRAST? NA
FILMMODE 0/1
FILMMODE? NA
FILTER 0/15
FILTER? NA
PHASE 0/3
PHASE? NA
SHARPNESS -6/6
SHARPNESS? NA
TINT -100/100
TINT? NA
CUSTOM1 NA
CUSTOM2 NA
DAY NA
NIGHT NA
PRESET? NA
Runco VX-2cx/VX-2dcx Owner's Operating Manual
Value
Stored?
Picture Adjust Commands
YES Sets a value for brightness
NA Returns brightness setting value
YES Sets a value for input color chroma delay
NA Returns input color chroma delay setting
YES Sets a value for color
NA Returns color setting value
YES Sets a value for contrast
NA Returns contrast setting value
YES Sets Film Mode off (0) or on (1)
NA Returns Film Mode setting (0 = off; 1 = on)
YES Sets a value for input color noise filter
NA Returns input color noise filter setting
YES Adjusts phase
NA Returns phase setting value
YES Sets a value for sharpness
NA Returns sharpness setting value
YES Sets a value for tint
NA Returns tint setting value
Image Preset Commands
YES Loads "Custom 1" image preset
YES Loads "Custom 2" image preset
YES Loads "ISF Day" image preset
YES Loads "ISF Night" image preset
NA Returns currently-selected preset
(ISF Day, ISF Night, Custom 1 or Custom 2)
Description
71
Serial Communications