Patch Write - Roland SonicCell User Manual

Using the SonicCell in Patch Mode

Patch Write

Saves the current patch as user data.
From the Patch Edit menu screen (p. 88), select "Write" to
access the Patch Name screen.
In this screen you can assign a name (patch name) of up
twelve characters to the patch you're going to save.
1. Move the cursor to the location where you want to enter a
character, and press [CURSOR/VALUE].
2. Turn [CURSOR/VALUE] to select the desired character, then
press [CURSOR/VALUE] to enter that character.
You can press [MENU] to view convenient functions for
text entry.
Press [MENU] once again to return to the previous screen.
Function Explanation
Press [CURSOR/VALUE] to insert a space
INSERT
(blank) at the cursor location.
Press [CURSOR/VALUE] to delete the
DELETE
character at the cursor location; subse-
quent characters will move forward.
UNDO Revert to the unedited patch name.
3. Repeat steps 1 and 2 as many times as necessary.
4. When you've finished entering the patch name, move the
cursor to "WRITE" and press [CURSOR/VALUE].
The Patch Write screen will appear.
116
5. Turn [CURSOR/VALUE] to select the save-destination
patch, then press [CURSOR/VALUE].
A confirmation message will appear.
6. To write the patch into memory, select "OK" and press
[CURSOR/VALUE].
If you decide you don't want to carry out the write, select
"CANCEL" and press [CURSOR/VALUE].
Once the data has been written, you'll be returned to the
previous screen.