Rhythm Set Write - Roland SonicCell User Manual

Rhythm Set Write

Saves the current rhythm set as user data.
From the Rhythm Edit menu screen (p. 117), select "Write" to
access the Rhythm Set Name screen.
In this screen you can assign a name (rhythm set name) of up
twelve characters to the rhythm set you're going to save.
1. Move the cursor to the location where you want to enter a
character, and press [CURSOR/VALUE].
2. Turn [CURSOR/VALUE] to select the desired character, then
press [CURSOR/VALUE] to enter that character.
You can press [MENU] to view convenient functions for
text entry.
Press [MENU] once again to return to the previous screen.
Function Explanation
Press [CURSOR/VALUE] to insert a space
INSERT
(blank) at the cursor location.
Press [CURSOR/VALUE] to delete the char-
DELETE acter at the cursor location; subsequent
characters will move forward.
UNDO Revert to the unedited rhythm set name.
3. Repeat steps 1 and 2 as many times as necessary.
4. When you've finished entering the rhythm set name, move
the cursor to "WRITE" and press [CURSOR/VALUE].
The Rhythm Set Write screen will appear.
Using the SonicCell in Patch Mode
5. Turn [CURSOR/VALUE] to select the save-destination
rhythm set, then press [CURSOR/VALUE].
A confirmation message will appear.
6. To write the rhythm set into memory, select "OK" and
press [CURSOR/VALUE].
If you decide you don't want to carry out the write, select
"CANCEL" and press [CURSOR/VALUE].
Once the data has been written, you'll be returned to the
previous screen.
131