Tone Copy; Patch Initialize - Roland SonicCell User Manual

Tone Copy

This operation copies tone settings from a patch to one of the
tones in the currently selected patch.
From the Patch Edit menu screen (p. 88), select "Tone Copy."
The Patch Tone Copy screen will appear.
( 2 )
1. Select the copy-source tone and copy-destination tone.
Parameter
(1) Group of the copy-source patch
(2) Copy-source patch
(3) Copy-source tone
(4)
Copy-destination tone
* The copy-destination patch is the patch that's selected in
the temporary area (p. 57).
2. Move the cursor to "COPY" and press [CURSOR/VALUE].
A confirmation message will appear.
3. To execute the copy, select "OK" and press [CURSOR/
VALUE].
If you decide not to execute the copy, select "CANCEL"
and press [CURSOR/VALUE].
Once the copy has been completed, you'll be returned to
the previous screen.
( 1 )
( 3 )
( 4 )
Using the SonicCell in Patch Mode

Patch Initialize

Returns the current patch settings to their initial values.
From the Patch Edit menu screen (p. 88), select "Patch Init."
A confirmation message will appear.
1. To execute the initialization, select "OK" and press
[CURSOR/VALUE].
If you decide not to initialize, select "CANCEL" and press
[CURSOR/VALUE].
When initialization is finished, you'll be returned to the
previous screen.
115