Selecting The Signal Sent To Your Computer (To Computer Screen) - Roland SonicCell User Manual

Input/output and effect settings (In/Out Routing)
■ Input FX Output screen .................................................................................................
Parameter
Output Level
Chorus Send Level
Reverb Send Level

Selecting the signal sent to your computer (To Computer screen)

Parameter
Type
148
Value Explanation
0–127 Set the level of the signal that is sent to the OUTPUT.
Adjusts the amount of chorus for the sound.
0–127
If you don't want to add the Chorus effect, set it to "0."
Adjusts the amount of reverb for the sound.
0–127
If you don't want to add the Reverb effect, set it to "0."
Value Explanation
Selects the signal sent to your computer.
MIX:
Generator
MIX, Input FX
Input FX:
Generator
*1 If you're in Patch mode, this will be only MFX.
The signals of the internal tone generator and external input
(USB audio, INPUT) will be sent.
MFX1
Tone
MFX2
(TG)
MFX3
USB
Audio
Input
Effect
INPUT
The external input signal (USB audio, INPUT) unprocessed
by the chorus/reverb/mastering effects will be sent.
MFX1
Tone
MFX2
(TG)
MFX3
USB
Audio
Input
Effect
INPUT
Chorus
Reverb
Mastering
*1
Chorus
Reverb
Mastering
*1
OUTPUT
Computer
OUTPUT
Computer