Roland SonicCell User Manual page 217

ENHANCER → FLANGER
73:
(ENH → FLANGER)
fig.MFX-73
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enh Sens # 0–127
Enh Mix # 0–127
Fln Pre Delay 0.0–100.0 ms
0.05–10.00 Hz,
Fln Rate #
note
Fln Depth 0–127
Fln Feedback # -98– +98%
D100:0W–
Fln Balance #
D0:100W
Level
0–127
ENH → DELAY
74:
(ENHANCER → DELAY)
fig.MFX-74
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enh Sens # 0–127
Enh Mix #
0–127
Delay Time
0–2600 ms, note
Delay
-98– +98%
Feedback #
200–8000 Hz,
Delay HF Damp
BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Adjusts the proportion of the de-
lay sound that is fed back into the
effect. Negative (-) settings will
invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not want
to cut the high frequencies, set
this parameter to BYPASS.
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output Level
CHORUS → DELAY
75:
fig.MFX-75
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Pre Delay 0.0–100.0 ms
Cho Rate # 0.05–10.00 Hz, note
Cho Depth
0–127
Cho Balance # D100:0W–D0:100W
Delay Time
0–2600 ms, note
Delay
-98– +98%
Feedback #
200–8000 Hz,
Delay HF Damp
BYPASS
Delay
D100:0W–D0:100W
Balance #
Level 0–127
FLANGER → DELAY
76:
fig.MFX-76
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Fln Pre Delay
0.0–100.0 ms
Fln Rate #
0.05–10.00 Hz, note
Fln Depth 0–127
Fln Feedback # -98– +98%
Fln Balance #
D100:0W–D0:100W
Delay Time 0–2600 ms, note
Effects List
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the delay time from the di-
rect sound until the chorus sound is
heard.
Frequency of modulation
Depth of modulation
Volume balance between the di-
rect sound (D) and the chorus
sound (W)
Adjusts the delay time from the di-
rect sound until the delay sound is
heard.
Adjusts the proportion of the delay
sound that is fed back into the ef-
fect. Negative (-) settings will invert
the phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this parame-
ter to BYPASS.
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Volume balance between the di-
rect sound (D) and the flanger
sound (W)
Adjusts the delay time from the di-
rect sound until the delay sound is
heard.
217