Roland SonicCell User Manual page 44

USER'S GUIDE
fig.disp-ToCom-Type-Mix.eps
8 Turn [CURSOR/VALUE] to move the cursor to the "Type."
9
Press [CURSOR/VALUE].
10
Change the value of Type to "MIX."
For more about the "Type" setting of To Computer screen
➝ p. 148
fig.disp-EffectSwitch.eps
If the Input Effect is Not Applied
In the In/Out Routing screen, press [MENU] to access the Menu screen.
Turn the Input Effect "ON."
If you want to make more detailed effect settings, refer to the
MEMO
following pages.
• Input Effect ➝ p. 147
• Chorus Send Level ➝ p. 148
• Reverb Send Level ➝ p. 148
• Mastering Effect ➝ p. 181
■ Applying an effect such as reverb to the sound heard from
the speakers, while recording the unprocessed sound to
your computer
Input-a.eps
Mic
■ Settings Required
1 Press [INPUT] so it's lit.
The Input screen will appear.
fig.disp-Input-Assign.eps
Routing the Sound Through InputFX (input effect)
2 Turn [CURSOR/VALUE] to move the cursor to the "Assign."
3
Press [CURSOR/VALUE].
44
SonicCell
Patch,
Performance
Input
Input FX
Monitor Amplifier etc.
Reverb,
Chorus,
Mastering
Effect
Computer