Installing Smartnetmonitor For Admin; Setting Up As A Print Server - Ricoh Aficio CL3000 Maintenance Manual

Installing SmartNetMonitor for Admin

Install SmartNetMonitor for Admin on your computer. For the installation procedure, see
ing SmartNetMonitor for
After installing SmartNetMonitor for Admin, go to
puter as a print server, or to

Setting Up as a Print Server

A A A A
Log on to the file server as Supervisor or a Supervisor equivalent.
B B B B
Run SmartNetMonitor for Admin.
C C C C
Click the [Group] menu, and click [Search Device], and then select [IPX/SPX].
A list of printers appears
Note
If you cannot identify which printer to configure from the list of printers, print Configuration Page
from the printer and find the desired printer. For more information about printing the Configura-
tion Page, see p.130 "Printing a Configuration
If no printer name appears on the list, match the frame types of the IPX/SPX protocol between
the computer and printer. Use the [Network] dialog box of Windows to change the frame type of
the computer. For more information about changing the frame type of equipment, see
figuring the NetWare Protocol using the Control
D D D D
Select a printer you want to configure, and then click [NIB Setup Tool] on the [Tools] menu.
E E E E
Click to select [Wizard], and then click [OK].
Operating Instructions
Admin".
p.79 "Setting Up as a Remote Printer"
Administrator Reference
p.77 "Setting Up as a Print Server"
to use it as a remote printer.
Page".
Panel".
77
p.94 "Install-
to use this com-
p.71 "Con-