Ricoh Aficio CL3000 Maintenance Manual page 172

Options
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to se-
lect characters, and then press
the { { { { Enter #} } } } key.
1 SSID:
A
The pointer (k) moves to the
next character position.
SSID:
Ak
C Continue entering the key.
Note
❒ The characters that can be
used are ASCII 0x20-0x7e (32
bytes).
❒ If you press the { { { { Escape} } } } key,
the pointer (k) moves to the
previous character position.
D After entering the key, press
the { { { { Enter #} } } } key twice.
SSID:
AAAAAAAAAAAAAAAA
The screen returns to step K.
L L L L
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "WEP Setting".
IEEE 802.11b:
WEP Setting
A Press the { { { { Enter #} } } } key.
WEP Setting:
*Not Active
30
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
[ 1]
[ 1]
C Press the { { { { Enter #} } } } key.
[32]
D Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to se-
play "Active", and then press
the { { { { Enter #} } } } key.
WEP Setting:
Active
The following message appears
on the panel display.
Change WEP Key:
Yes
Note
❒ When setting the WEP Set-
ting to "Active", you will
need to enter the WEP key. If
you have not entered the key,
be sure to enter it.
❒ If you have entered the WEP
key and change the setting,
press the { { { { U U U U } } } } or { { { { T T T T } } } } key to
display "No", and then press
the { { { { Enter #} } } } key.
WEP Key:
k
Note
❒ The value in brackets at the
upper right is the number of
characters entered.
lect characters, and then press
the { { { { Enter #} } } } key.
WEP Key:
0
The pointer (k) moves to the
next character position.
WEP Key:
0k
[ 0]
[ 1]
[ 1]