Looking After The Machine - Ricoh fax4700l Operator's Manual

LOOKING AFTER THE MACHINE

LOADING PAPER
Loading Paper in the Main Cassette or Optional Front Paper Feed
Unit
When the Add Paper indicator (
empty.
1. Slide out the cassette until it stops. With
both hands, remove it by holding it up
and lifting it out at the same time.
Note: When you pull out the cassette,
pull it out horizontally.
2. Press down the metal base plate until it
clicks into place.
3. Fan the paper. Make sure the edges are
uniformly aligned and place the paper
into the cassette with the side on wish
you wish to print face up. Check the pa-
per fits under the metal corners.
Make sure the back fence is set in the
Groove on the paper cassette.
4. If there is space between the paper and
fences, the paper will not be fed prop-
erly. To avoid this, carefully move in
each fence until it is flush with the paper.
NOTE: Make sure that the paper fits the
corners.
Do not fill up the cassette past the
load limit marker.
Load Limit
5. Replace the cassette to its original position.
) on the operation panel is lit, the cassette is
181