Program Your Flat Panel Display; Choose An Input Source; Explore The Home Menu - Pioneer Kuro KRP-500M Operating Instructions Manual

Basic Operations

3.2 Program Your Flat Panel Display

To take advantage of some built-in features, choose the input source, select a language and set the picture quality.
The sections below include how to use the Home Menu and simplified User Menu for each programming option.
3.2.1

Choose an Input Source

To choose an input source, note that the external equipment is properly
connected to the input terminals on the back of the flat panel display. Follow
the directions below to choose an input source.
Press INPUT (buttons 1 through 6) on the remote control.
The corresponding terminal/port number is selected as an input source.
3.2.2

Explore the Home Menu

The Home Menu is the main menu for the flat panel display. Most commands and settings are programmed
through this menu. The following section describes a typical method for working with the panel's menus. For
actual procedures, see the appropriate page(s) that describe individual functions.
1) Press HOME MENU on the remote
to access the main menu.
2) Use the Up/Down arrows (/ ) to
highlight a menu item.
3) Use the Left/Right arrows (/ )
to scroll through options for that
menu item.
4) Highlight the selected menu option.
5) Press ENTER to lock in the change.
6) Press RETURN to move back to a previous menu/submenu page when changing more than a single option.
7) Press HOME MENU again to exit the menu screen.
Remote control
EXIT USER MENU
TOP MENU TOOLS
GUIDE
ENTER
HOME
MENU RETURN
MENU
MONITOR
INPUT
1 2
5 6
SUB
SPLIT SWAP
INPUT
AV AUTO
FREEZE
SELECTION SET UP
Home Menu screen
HOME MENU
FLAT PANEL DISPLAY
Picture
Screen
Sound
Power Control
Option
Input Setup
Control Setup
Exit
03
3 4
7 8
PIP
SHIFT
SCREEN
SIZE
25
En