Smart Starts For New Owners; Extend Your Panel Life; Adjust The Power Indicator Brightness; Set Input Priority - Pioneer Kuro KRP-500M Operating Instructions Manual

Basic Picture and Sound Adjustment
04

4.2 Smart Starts for New Owners

Many of the flat panel display features make it easier to use but also environmentally friendlier. This section
explains how to extend the life of your panel through being energy efficient. We suggest applying all of the
following functions below for the simplest usage, best quality, and longest life span.
4.2.1

Extend Your Panel Life

This function provides short-cuts to your panel's longer service life. Your flat panel display includes a Long Life
Settings option. Activating this option causes the panel to automatically select several different features that can
prolong the life of your panel and help alleviate after-image ghosts or burn-in. To set this option, follow the steps
below.
1 ) Access
A confirmation screen appears.
2 ) Select
The following settings are automatically entered:
•Auto Size: Wide Zoom
•Side Mask - Detection: Mode 1
•Orbiter (AV source): Mode 1
•Orbiter (PC source): Mode 1
•Energy Save: Save 1
•AV Selection: OPTIMUM (only when it was set to DYNAMIC previously)
3 ) Press HOME MENU to exit the menu.
4.2.2

Adjust the Power Indicator Brightness

Adjust the brightness of the Power On indicator depending on the brightness level of the viewing area. Setting to
Auto toggles the brightness of the indicator between High, Mid and Low to match the brightness level of the
viewing area. To set the indicator, follow the directions below.
1 ) Access
2 ) Select
3 ) Press HOME MENU to exit the menu.
4.2.3

Set Input Priority

With a priority input assigned, the flat panel display automatically switches to that input when signals are present.
To set the priority input, follow the directions below.
1 ) Access
2 ) Select
3 ) Select the desired input.
Detecting another signal at a different input causes the selected input to automatically change to the new
input. After input changes, the previous input is not restored even when the signal disappears at the input.
4 ) Press HOME MENU to exit the menu.
32
En
Long Life Settings through the
Yes
from the submenu.
Blue LED Dimmer through the
Auto, High, Mid or Low from the submenu.
Input Priority
through the
Auto
from the submenu.
Option menu.
Option menu.
Option .
menu