Operating The Remote Control - Pioneer Kuro KRP-500M Operating Instructions Manual

Introduction to the Flat Panel Displays
1.2.2

Operating the Remote Control

The remote control for the flat panel display is a powerful tool. This section provides a brief introduction to your
remote control while later sections explore more advanced operations.
Insert the Batteries into the Remote Control
To open, push and slide the battery cover in the direction of the arrows.
Load the supplied two AA size batteries by the negative polarity (–) ends first.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions. If the
remote control seems to be failing or is weak, replace the provided batteries with new alkaline batteries.
Never mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leaks in old batteries. Also, mixing different types or brands of batteries can cause issues as batteries
brands have slightly different characteristics.
Note: If the flat panel display's remote control is not needed for an extended length of time, remove the batteries.
When disposing of used batteries, please comply with
governmental regulations or environmental public institution's
rules that apply in your country/area.
Caution: When changing batteries, use only conventional non-rechargeable alkaline or manganese batteries(2). Risk
of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
01
9
En