Pentax Optio I-10 Operating Manual page 94

1
Press the four-way controller (2) in A mode.
3
The [Drive Mode] screen appears.
2
Use the four-way controller
(45) to select j or K and
press the 4 button.
The camera is ready to take a series of
pictures.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in j and K modes.
• j and K cannot be selected in 9 (Green), b (Auto Picture), A
(Night Scene), C (Movie), S (Fireworks), N (Frame Composite),
X (Digital Wide) or F (Digital Panorama) mode.
• The interval of j (Continuous Shooting) varies according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.70), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
92
Shutter release
button
Four-way controller
4 button
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting Continuous Shooting
Cancel Cancel Cancel
MENU MENU MENU
OK OK OK
OK OK OK