Pentax Optio I-10 Operating Manual page 24

* 14 changes as follows depending on the [Eye-Fi] setting in [W Setting]
menu.
During Eye-Fi communication. The camera is communicating or
1
searching for the access point when [Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not communicating when
2
[Eye-Fi] is set to O (on).
3
Eye-Fi communication prohibited. [Eye-Fi] is set to P (off).
4
Eye-Fi version error. The version of the Eye-Fi card is out of date.
* 17 disappears if any operation is not performed for two seconds.
* 19 depends on the [D-Range Setting] setting in the [A Rec. Mode]
menu.
When [Highlight Correction] is set to O
P
When [Shadow Correction] is set to O
Q
When [Highlight Correction] and [Shadow Correction] are both set to O
O
If [Highlight Correction] and [Shadow Correction] are both set to P
(Off), nothing appears in 19.
* Some indications may not appear depending on the shooting mode.
Histogram + Info/No Info Display in Still Picture Capture Mode
A1 to A18 and B3 appear when "Histogram + Info" is selected. Only B3
appears when "No Info" is selected.
A1
A2
A3
A4
A5
B1
B2
A6
A7
A8
22
A9 A10 A11 A12 A13
P
DATE
+1.0
1/250
F3.5
38
A16 A17 A18 A19 A20
AWB AWB AWB
12M 12 12M
ISO ISO ISO
B3
A14
A15
200 200 200