A1 Shooting mode (p.67)
A2 Battery level indicator (p.34)
A3 Face Detection icon (p.70)
A4 Date Imprint setting (p.119)
A5 EV Compensation (p.108)
A6 Camera shake reduction icon
( p.116 )
A7 Memory status (p.41)
A8 Remaining image storage
capacity
A9 Flash Mode (p.100)
A10 Drive Mode (p.90, p.91)
A11 Focus Mode (p.102)
* A6 varies depending on the following conditions.
When the shutter release button is pressed halfway with [Shake
M
Reduction] in the [A Rec. Mode] menu set to O (On).
When [Shake Reduction] is set to P (Off) (If the camera shake is likely to
occur, f is indicated when the shutter button is pressed halfway.)
* A12 changes as follows depending on the [Eye-Fi] setting in [W
Setting] menu.
During Eye-Fi communication. The camera is communicating or
1
searching for the access point when [Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not communicating when
2
[Eye-Fi] is set to O (on).
3
Eye-Fi communication prohibited. [Eye-Fi] is set to P (off).
4
Eye-Fi version error. The version of the Eye-Fi card is out of date.
* A17 depends on the [D-Range Setting] setting in the [A Rec. Mode]
menu.
When [Highlight Correction] is set to O
P
When [Shadow Correction] is set to O
Q
When [Highlight Correction] and [Shadow Correction] are both set to O
O
If [Highlight Correction] and [Shadow Correction] are both set to P
(Off), nothing appears in A17.
A12 Eye-Fi communication
status ( p.205 )
A13 Digital Zoom/
Intelligent Zoom icon (p.76)
A14 Histogram (p.28)
A15 Sensitivity (p.114)
A16 World time setting ( p.198 )
A17 D-Range Setting (p.109)
A18 Recorded Pixels (p.106)
A19 White Balance (p.110)
A20 AE Metering (p.112)
B1 Shutter s peed
B2 Aperture
B3 Focus frame (p.64)
23