Pentax Optio I-10 Operating Manual page 106

5
Press the 4 button.
The focus is fixed and the camera returns to capture status.
After the focus is fixed, you can press the four-way controller (5) again
to display the \ indicator and readjust the focus.
The shooting mode and drive mode cannot be changed while the \
indicator is displayed.
To switch from \ to another focus mode, press the four-way controller
(5) while the \ indicator is displayed.
3
To Set the Focusing Area
You can change the autofocus area (Focusing Area).
J Multiple
Spot
K
W Automatic Tracking AF
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AF Setting].
3
Press the four-way controller (5).
The [AF Setting] screen appears.
4
Use the four-way controller (23) to select [Focusing
Area].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller
(23) to change the focusing
area setting.
104
Normal autofocus area
The autofocus area becomes smaller.
Keeps moving subjects in focus.
MENU
AF Setting
Focusing Area
Focus Assist
Cancel OK
OK