Pentax Optio I-10 Operating Manual page 91

4
Use the four-way controller
(2345) to choose the frame
you want to use.
5
Turn the zoom lever to the
right (y).
The selected frame appears in single-
image display.
You can choose another frame using
either of the following operations.
Four-way controller (45)
Zoom lever to the left (f)
6
Press the 4 button.
The framed image appears on the
display.
When the camera detects a person's
face, the Face Detection function is
activated and the face detection frame
appears (p.70).
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
• The number of recorded pixels is fixed at h (2048×1536)/L
(1920×1080).
• At shipment, the camera includes 3 default frames and 42 optional
frames for each aspect ratio (4:3 and 16:9). (The CD-ROM supplied
with the camera contains a total of 90 frames, including the default
frames.)
Press to choose a different frame.
Returns to the 12-frame display of the frame
selection screen, and then perform Step 4 to
choose a different frame.
38
OK OK OK
OK OK OK
3
89