Pentax Optio I-10 Operating Manual page 60

Ex.) To set the [Sensitivity] on the [A Rec. Mode] menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller
(3).
The frame moves to [Recorded
2
Pixels].
3
Press the four-way controller (3) four times.
The frame moves to [Sensitivity].
4
Press the four-way controller
(5).
A pull-down menu appears with the
items that can be selected.
The pull-down menu displays only
those items that can be selected with
the current camera settings.
5
Use the four-way controller (23) to change the setting.
The sensitivity changes each time the four-way controller (23) is
pressed.
6
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting the other
functions.
To exit the settings, press the 3 button.
To use another operation, refer to the following alternate Step 6 options.
58
Rec. Mode 1/3
12
Recorded Pixels
White Balance AWB
AF Setting
AE Metering
Sensitivity Auto
EV Compensation
Exit
MENU
Rec. Mode
1/3
Recorded Pixels
12
White Balance
Auto
AF Setting
80
AE Metering
100
Sensitivity
200
EV Compensation 400
Cancel
MENU
M
0.0
M
OK
OK