Pentax Optio I-10 Operating Manual page 50

7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller
1
(23) to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in Step 4, the
setting switches between am and pm
corresponding to the time.
9
Press the four-way controller
(3) to select [Settings
complete].
10
Press the 4 button.
This confirms the date and time.
If you press the 4 button in Step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the 3 button. In this case, the [Initial Setting] screen will
appear next time you turn the camera on.
[Language/
to the pages below for instructions.
• To change the language, follow the steps in "Changing the Display Language"
(1p.202).
• To change the date and time, follow the steps in "Changing the Date and
Time" (1p.196).
• To change the city or turn DST on and off, follow the steps in "Setting the
World Time" (1p.198).
48
], [Date], [Time], [Hometown] and [DST] can be changed. Refer
Date Adjustment
Date Format mm/dd/yy 24h
Date 01/01/2010
Time 00:00
Settings complete
Cancel
MENU
Date Adjustment
mm/dd/yy 24h
Date Format
Date 01/01/2010
Time 00:00
Settings complete
Cancel
MENU
OK
OK