Save As A Motion Image File - Panasonic WV-AS65 Operating Instructions Manual

Save as a Motion Image File

It is possible to save the downloaded images as a motion image file. The files are saved individually per channel.
The exclusive viewer software is necessary to play back the images. It can be saved optionally along with the image
file.
Step 1
Play the image from the desired channel to be saved
in the single playback window.
Note:
Only images from a single channel can be saved
as a motion image file.
Step 2
Designate the folder where the file is to be saved. Drag
the slider knob from the desired start point to the end
point while holding down the Shift key on the key-
board.
The highlighted range will be colored blue.
Note:
If the highlighted range isn't colored blue, check the
following:
• Only a single channel being displayed. It is
impossible to designate the time range when
displaying a multi-channel screen.
• Do not display a 4-file playback window. It is
impossible to designate the time range when
displaying the 4-file playback window.
Step 3
Select an option for the viewer software and go to the
next respective step.
[When saving the viewer software together with the
file] Go to step 4.
[When not saving the viewer software together with the
file] Go to step 5.
Note:
• Refer to the Operating Instructions of the recorder
about descriptions of how to use the viewer soft-
ware.
• If the size of a file downloaded using this software
is larger than 2 GB, the audio data attached to the
files may not be heard when using the viewer soft-
ware.
Step 4
When saving the file with the exclusive viewer soft-
ware, select "With viewer soft(V)..." from "Save as
motion image file(M)" of "File(F)" on the menu bar or
click the [Save as motion image file with viewer soft]
button on the tool bar.
The "Save as motion image file" window will be dis-
played.
Note:
The viewer software will be automatically saved
together with the image file when operated from the
tool bar.
99