Panasonic WV-AS65 Operating Instructions Manual page 57

Step 5
When it is necessary to set the VMD areas, click the
[VMD area setup(V)...] button to display the VMD
setup window.
When the VMD areas have already been set, go to
step 9.
Note:
The VMD areas are registered for the respective
camera channel of each recorder.
Step 6
The VMD area setup window will be displayed.
q
w
t
y
u
i
o
!0
e
r
!1 !2
Perform the following settings:
q Recorder title and Camera title
The name of the selected recorder and the camera
channel number to be searched will be displayed.
w VMD area setup display
A still image from the selected camera channel will
be displayed. Set the VMD area in this display
area.
e Deletion checkbox
Select the desired VMD area to be deleted by
checking the box next to the desired VMD area.
r [DELETE AREA(D)] button
Click this button after checking the box next to the
desired VMD area to be deleted.
t "Sensitivity(S)"
Select the sensitivity for each VMD area from the
following:
"HIGH": High sensitivity
"MID": Middle sensitivity
"LOW": Low sensitivity
"OFF": Ignores motion in the selected area
The default setting is "OFF" for each area.
y "VMD mode"
Select the VMD mode to be searched from the fol-
lowing: The default setting is "ANY AREA".
"ANY AREA(A)"
u Mask period(M)
Select a masking duration from the following:
1s/ 1min/1h/24h (The default setting is "1s" for
each area.)
"VECTOR(V)"
i VMD area order
Select an order of the VMD areas.
o Detection time of vector mode
Select the duration of motion detection between
two VMD areas.
"DURATION(U)"
!0 Detection time of duration mode
Select a detection time for each area.
!1 [OK] button
Click this button to save the settings for the VMD
areas.
!2 [Cancel] button
Click this button to cancel to save the settings and
close the VMD setup window.
57