Panasonic WV-AS65 Operating Instructions Manual page 137

Step 4
Set up the schedule.
q
w
e
r
t
y
u
i
Perform the following settings.
q "Schedule Setup"
Set up the schedule.
w "Schedule Title(S)"
Enter the schedule name.
Do not overlap with another schedule name.
Enter up to 16 alphanumeric characters. The fol-
lowing characters are not available (\, /, :, *, ?, ", <,
>, |).
e "Start day"
Check the box next to the desired day of the week
when the schedule is to be performed.
r "Start time(T)"
Select the download start time.
t "Recorder(R)"
Select the recorder for downloading.
y "Time range" ("FROM(F)"/"TO(O)")
Set the time range for downloading.
Duration between "FROM(F)" and "TO(O)" should
be 24 hours or less.
u "Standard CH(D)"
ND300
Select a camera channel for the standard time.
Notes:
• It is necessary to set a standard time among the
cameras that have different times. Downloading will
be performed based on the time of the selected
camera channel.
• Select a camera channel to be downloaded.
• It is impossible to select a camera channel when
the recorder in use is the WJ-ND200.
i "Camera CH"
To select all the camera channels, check the "ALL
(L)" box. To select only the desired cameras, check
the "Per camera(C)" box. Check the boxes of the
desired camera channels from which images are to
be downloaded.
Note:
The images from all the selected camera channels
will become one file. When "ALL(L)" is selected,
images from all the camera channels will become
one file. In this case, it is possible to play it on a
multi-screen (4-/9-/16-split screen).
Step 5
Click the [OK] button.
The settings will be saved and the schedule title will be
displayed on the list of the registered schedule title.
Important:
The set schedule will be activated at "Start time
(T)" on the clock of the PC in use. When the clock
time is different between the PC and the recorder,
downloading may not be performed correctly. Set
"Start time(T)" and "Time range" after due consid-
eration of the time difference between them and if it
is impossible to synchronize them.
Note:
When the [OK] button is clicked, the created sched-
ule will become active automatically. To invalidate
the created schedule, uncheck the box next to the
created schedule title. The invalidated schedule will
not be implemented.
When the message window is displayed by clicking the
[OK] button, refer to page 154 and follow the descrip-
tions.
137