Preface; System Configuration - Panasonic WV-AS65 Operating Instructions Manual

Preface

The PC Software Package WV-AS65 (hereinafter referred to as WV-AS65) is designed for integrated management
of up to 100 Panasonic WJ-ND300, WJ-ND200 network disk recorders and WJ-HD300 series digital disk recorders
(hereinafter referred to as recorders) connected to a network such as a LAN or the Internet, and runs on the
® ®
Microsoft Windows operating system.
By using this software on a personal computer (hereinafter PC) via a network, it is possible to display live images of
the cameras connected to the recorder, to play images stored on the recorder, and to download image files to the
hard disk drive of the PC. It is possible to search and play the downloaded images matching the specified conditions
such as recorded time, etc.

System Configuration

~
This software consists of the following 2 applications:
The main application runs in the following 2 modes.
[Main application]:
<Network mode>
In this mode, it is possible to control a recorder remotely via a network.
Run this application in this mode to monitor live images from cameras connected to a
recorder or play the recorded images stored in a recorder.
<Local mode>
In this mode, it is possible to access downloaded recorded images saved onto the hard
disk drive of a PC.
Run this application in this mode to search and play downloaded recorded images.
Network
When the system is configured as "System A" in the illustration above, live
images can directly be monitored with this software. To monitor live
images, the followings are necessary:
• Register cameras in the recorder.
• Do not use two or more ports of the recorder.
• Select "MJPEG" for the live image transmission mode of the camera
when the camera in use is WV-NP472, WV-NS32x or WV-NW47x.
Refer to the operating instructions of the recorder for further information
about cameras can be connected to the recorder.
System A
3