Table of Contents
Advertisement
Setting
SMTP Server IP
Address or Host
Name
*1
Port No.
POP3 Server IP
Address or Host
Name
*1
Port No.
Login ID
*2
Password
*2
Reply E-mail
Address
*2
Destination E-
mail Address
*2
1—3
Subject
*2
Text
*2
But [Space], ["], ['], [&], [<] and [>] are not available.
*1
But ["] is not available.
*2
•
If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as "192.168.0.253". But "0.0.0.0"
and "255.255.255.255" are not available. Or set a host
name (1—255 characters).
•
You can set IPv6 address.
•
Enter a number (1—65535). Usually set to 25.
•
If you set the POP3 server IP address, set 4 digits (0—255)
and 3 periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name
(0—255 characters).
•
You can set IPv6 address.
•
Enter a number (1—65535). Usually set to 110.
•
If your ISP requires a login ID to log in to a POP3 server,
set it (0—63 characters).
•
If your ISP requires a password to log in to a POP3 server,
set it (0—63 characters).
•
Set the sender's E-mail address. We recommend you to
set the administrator's E-mail address.
•
Set the destination E-mail address (up to 3).
•
Enter a subject with ASCII characters (see page 163) or
characters in each language (0—44 characters for a 1-byte
character and 0—22 characters for a 2-byte character).
•
Enter text with ASCII characters (see page 163) or
characters in each language (0—63 characters for a 1-byte
character and 0—31 characters for a 2-byte character). But
the [end-of-line] key is not available.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
89
Advertisement
Table of Contents
