Table of Contents
Advertisement
2.7.1
Connecting this Product to a Router Not Supporting
UPnP
To allow access from the Internet with a router not supporting UPnP
procedures below.
1.
Select [Static] on the Network (IPv4) page.
(1) Access this product (see page 12).
(2) Click [Setup] tab at the top of the page.
(3) Select [Static] on the Network page.
•
The Static IP Address Configuration page is displayed. Make a
note of the IP address and port number, since they are required to
enable port forwarding on the router.
(4) Click [Save] without changing the settings.
(5) Click [Restart].
2.
Enable port forwarding on the router.
Using the IP address and port number noted on step 1.(3), enable port
forwarding on the router. See the router manual for how to enable port
forwarding.
3.
Register with the DynamicDNS service (see page 58).
Port Forwarding feature
The port forwarding feature is required to allow access from the Internet with a
router not supporting UPnP
Each product must be assigned a unique port number.
Global IP address
of the router
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
Internet
192.168.0.254
Router
Note
The IP addresses shown above may differ from those offered on your home network.
"Port forwarding" may be called "Address translation", "Static IP Masquerade", "Virtual server"
*1
or "Port mapping" in other products.
(IPv4 Only)
TM
(IPv4 Only)
*1
. It exchanges a local IP address for a global one.
TM
Port No.
Port Forwarding feature
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
192.168.0.1
[For assistance, please call: 1-800-272-7033]
192.168.0.253:80
192.168.0.252:81
192.168.0.252
Port No. 81
Operating Instructions
, follow the
TM
192.168.0.253
Port No. 80
57
Advertisement
Table of Contents
