Creating Still Picture From Motion Picture - Panasonic HDC-HS100 Operating Instructions Manual

Motion picture compatibility
This unit is based on the AVCHD format.
The video signal that can be played back on
this unit is 1920 1080/50i, 1920 1080/25p
or 1440 1080/50i.
This unit may degrade or not play back
motion pictures recorded or created on
other products, and other products may
degrade or not play back motion pictures
recorded on this unit, even if the products
support AVCHD.
Sound will be heard only during normal
playback.
If pause play is continued for 5 minutes, the
screen returns to the thumbnails.
Any scenes where the thumbnails are
displayed as cannot be played back. An
error message appears and the screen shows
the thumbnails.
During motion picture playback, the power will
not turn off even if the LCD monitor is closed.
The remaining time for playback indication will
be reset to "0h00m00s" each scene.
A continuous recording of motion picture data
that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with
another device.
Creating still picture from
motion picture
A single frame from the recorded motion picture
can be saved as a still picture.
1
Pause at the scene you want to
save as a still picture during
playback.
It is convenient to use slow-motion playback
and frame-by-frame playback.
2
Press the button fully.
Still picture is recorded and will be saved on the
same media as the motion picture.
You might get a blurry still picture if you press
the button without pausing.
Date the motion picture was recorded will be
registered as date of the still picture. (The date
still picture was created will be registered if
there is no date recorded for the motion
picture.)
Quality will be different from the normal still
picture.
73
VQT1U19