Panasonic HDC-HS100 Operating Instructions Manual page 106

When you stop printing halfway
Move the cursor button down.
p A confirmation message appears. If [YES] is
selected, the number of prints set is cancelled
and the screen returns to step 4. If [NO] is
selected, all the settings are kept and the
screen returns to step 4.
p Avoid the following operations during printing.
These operations disable proper printing.
LDisconnecting the USB cable
LOpening the SD card cover and removing
the SD card
LSwitching the mode dial
LTurn the unit off
p Check the settings for the paper size, print
quality etc. on the printer.
p The print quality varies with paper size.
p The edges of still pictures recorded in this unit
with a 16:9 aspect ratio may be cut off. When
using a printer with a trimming or borderless
printing function, cancel this function before
printing. (Refer to the operating instructions of
the printer for details.)
p When the unit is connected directly to the
printer, the DPOF settings cannot be used.
p Connect the printer directly to this unit. Do not
use a USB hub.
106
VQT1U19