Panasonic HDC-HS100 Operating Instructions Manual page 26

[SETUP]
[CLOCK SET] (F 28)
[DISPLAY]
The screen indications are selected as shown
in the illustration below.
[OFF] [ON]
[DATE/TIME] (F 28)
[DATE FORMAT] (F 28)
[POWER SAVE]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns off
to save battery life.
The power save function will not activate
when:
connected to AC adaptor
using the USB for PC, DVD burner, printer
PRE-REC is used
*3
[QUICK POWER ON] (F 36)
[QUICK START] (F 36)
[BEEP SOUND]
This allows operations such as starting and
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (F 123)
26
VQT1U19
[POWER LCD] (F 31)
[LCD AI]
[LCD SET] (F 31)
[EVF SET] (F 31)
[COMPONENT OUT] (F 92)
[HDMI RESOLUTION] (F 91)
[VIERA Link] (F 93)
[TV ASPECT] (F 90)
1h30m
[AV JACK] (F 92)
R 1h20m
Output from the AV/headphone output
terminal can be set to [AV OUT] or [PHONE].
[AV OUT]:
When AV cable is used
[PHONE]:
When headphone is used
You will hear a buzzing sound when it is set
to [AV OUT] while using a headphone.
[INITIAL SET]
Set to [YES] for changing the menu settings
back to the default condition.
(Settings for [CLOCK SET], [MEDIA SELECT]
and [LANGUAGE] will not be changed.)
[FORMAT CARD]
[FORMAT HDD]
[DEMO MODE]
This item is used to start the unit
demonstration.
(Only when the mode dial is at the
position)
If [DEMO MODE] is switched [ON] when there
is no SD card inserted and while this unit is
connected to the AC adaptor, the
demonstration automatically starts. If any
operation takes place, the demonstration is
cancelled. However if no operations take place
for approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
[LANGUAGE] (F 25)
*1
(F 32)
*3
(F 87)
*4
(F 87)