Panasonic HDC-HS100 Operating Instructions Manual page 130

Problem
Colour balance of images
is strange when
recording in a place such
as a gymnasium.
Some playback images
are skipped
automatically.
Scene does not playback
to the end.
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
Scenes cannot be
deleted.
The images on the SD
card do not look normal.
If the SD card is inserted
in this unit, it is not
recognised.
130
VQT1U19
Check points
In a place with multiple light sources, such as a gymnasium
or a hall, the auto white balance function may not operate
properly. In this case, set the white balance setting to [
(Indoor mode2)]. If you cannot record clearly with the [
(Indoor mode2)], set it to [
(F 67)
The play mode is set to
Change the play mode to
Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
Change the [TV ASPECT] setting to match the aspect ratio
of the TV.
If both HDMI mini cable and component cable are
connected, set the unit to playback mode.
Change the setting of the unit depending on the cable
connecting to the TV. (F 91)
Protected scenes cannot be deleted. Release the protect
setting. (F 82)
Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/still
pictures are unnecessary, format the SD card or HDD to
erase the data. (F 87) Please be aware that if an SD card
or HDD is formatted then all the data recorded on the SD
card or HDD is erased and cannot be recovered. Back up
important data on a PC, disc etc.
If the SD card's write protect switch is set to LOCK, then
deletion is disabled. (F 21)
The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Back up important data on
a PC, disc etc. as well.
If the SD card is formatted on a PC, it may not be
recognised by this unit. Use this unit to format SD cards.
(F 87)
(Manual adjustment mode)].
(Intelligent scene selection).
(All scenes). (F 74)