DRIVE/
Single frame erase — Erase button
Check the following before erasing pictures.
● Make sure the card is not write-protected. If so, remove the write-protect seal.
● NEVER open the card cover, eject the card, remove the batteries, or pull out the plug
when the card access lamp is blinking during picture erasure. Doing so may destroy
data stored on the card.
1
Select a picture you wish to erase
using the Arrow pad (P.38, 42).
● Cancel the Protect setting (P.79) if it
is on.
Ñ
3
Press
to select YES.
Canceling single frame erasure
ñ
Press
to select NO, then press
(Erase) button (Cont.)
or the
2
Press the
(Erase) button.
● The
ERASE screen asking you to
confirm the erasure will appear.
SELECT
4
Press
to erase the picture.
button.
ERASE
YES
N O
GO
69
3