How To Connect - Olympus CAMEDIA C-700 Ultra Zoom Reference Manual

Connecting directly to a computer by cable
(Cont.)
● When connecting the camera to a personal computer, ensure that remaining battery
power is sufficient. If battery power runs out while the computer is reading data from
the card loaded in the camera, the camera stops operating and downloaded image
data (file) will be lost. Use the AC adapter (optional) when downloading files.
● When using CAMEDIA Master, use Version 2.5 or higher.
● USB support is not available under the following environments, even for PCs
equipped with a USB port.
Windows 98 upgrade (from Windows 95)
Windows 95
Windows NT 4.0
Computers with a USB port added through an extension card.
● Be aware that USB may not operate under upgrade version of Mac OS or USB
MASS Storage Support.
Notes on the use of the AC adapter:
Make sure that the camera's power is off before connecting the AC adapter.
7
Before removing the AC adapter, disconnect the camera from the computer, and
make sure that the camera's power is off.

How to connect

To connect the camera to a personal computer, use the exclusive USB cable
(provided).
Personal computer
164
Note:
USB cable
~
Camera's USB
connector
Continued on next page