Table of Contents
Advertisement
Erasing images
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
• For image file types recorded using RAW+JPEG, single-frame erase erases only the JPEG
images while the RAW data is retained. For all-frame and selected frame erase, both the
RAW and JPEG images are erased.
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g "Protecting images – Preventing
accidental erasure" (P. 63)
Single-frame erase
1
Play back the image you want to
erase.
2
Press the S (erase) button.
3
Use ac to select [YES], then
press i.
All-frame erase
1
MENU [W] [CARD SETUP]
2
Use ac to select [ALL ERASE], then press i.
3
Use ac to select [YES], then press i.
• All frames will be erased.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or index
display.
1
Display the images you want to erase and
press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you
want to erase and press the i button.
2
Press p to display the next images you want
to erase and press the i button.
3
After you have selected the images to erase, press the S (erase)
button.
4
Use ac to select [YES], then press i.
x Notes
S button
S
4
64
EN
Advertisement
Table of Contents
