Olympus CAMEDIA C-700 Ultra Zoom Reference Manual page 17

Name of parts
@
Spot metering/Macro mode (P. 70)
● Displayed when the Spot metering/Macro mode is selected by pressing the
(Macro/Spot) button.
No indication: Spot metering/Macro off,
Spot metering/Macro
#
White balance (P. 115, 116)
● Displayed when WB is set on the Menu.
No indication: Auto,
Fluorescent,
$
ISO (P. 102)
● Displays the ISO (AUTO, 100, 200, 400 or 800) selected on the Menu. When set
to AUTO, the ISO changes to 100 when the Mode dial is set to A/S/M. When
AUTO is selected, the ISO is automatically increased in low-light situations when
the flash is not used. This is to prevent blurring from camera shake.
%
Manual Focus (P. 89, 90)
● Displayed when locking focus using the Manual focus function.
^
AF confirmation mark (P. 35, 40)
● Lights when the focus and exposure are locked by pressing the Shutter button
halfway. If the subject is out of focus, the mark blinks.
&
Flash stand-by (P. 36, 77)
● The flash fires when
Camera shake warning (P. 72)
● Blinks if camera shake occurs because the subject is dark, the shutter speed is
too low, and the flash is closed.
Flash charge (P. 78)
● The flash is charging if
shooting. Wait until
Viewfinder/Monitor indications
— Shooting information (Cont.)
9
^
&
*
SLOW1
(
: Daylight,
: One touch white balance
MF
lights by pressing the Shutter button halfway.
blinks just after the flash is raised or after flash
stops blinking, then press the Shutter button.
0
!
@
#
$
%
: Spot metering,
: Overcast, : Tungsten light,
: Macro, :
:
17