Muratec MFX-1450 Software Manual page 35

[OK]
Click this button to exit the "Properties" dialog box and apply all settings you
adjusted.
[Cancel]
Click this button to exit the "Properties" dialog box without applying any changes.
[Help]
Click this button to display the help window.
[Default]
Click this button to restore all of the settings on the currently displayed tab to their
initial defaults.
 Zoom
You can zoom (enlarge and reduce) data two ways.
Output Size
Choose this option to scale your print job to the selected paper size regardless of the
original document size. If you want your document to be fitted to the selected paper
size, check on the "Scale to fit".
NOTE
When "Scaling" is set for other than 100%, or the same paper size as "Paper size" is
selected, "Scale to fit" is not available.
Scaling(%)
You can enlarge or reduce the document in 1% increments, from 25% to 400%.
NOTE
"Scaling (%)" is not available when "Output Size" is selected.
 Paper Size
Select the paper size from the drop down list, which shows the paper sizes sup-
ported in the print driver's current setting.
Orientation
Portrait orients the print vertically. Landscape orients the print horizontally.
Resolution
Select either "600 × 600 dpi", "400 × 400 dpi" or "200 × 200 dpi" as the printing
resolution.
NOTE
"600 × 600 dpi" provides better quality, but it also takes longer to print at this set-
ting than at "400 × 400 dpi" or "200 × 200 dpi".
PC_Users_Guide.indb 7
S Pc 2-7
endinG a fax
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2007/04/27 10:17:43