Muratec MFX-1450 Software Manual page 190

Phenomenon Device to check
A document PC
created with
the specified
application
software
cannot be
printed.
A document PC
created with
the specified
application
software is
not printing
properly.
A document PC
is not print-
ing properly
Cannot select PC
items on
the printer
driver
Documents PC
set in a
work group
in Microsoft
Excel are
not printing
properly
(*** indicates your machine's model name, ex."MFX-2050/F-565" or "MFX-1450/F-525")
6-8 P
rintinG errorS
PC_Users_Guide.indb 8
Check point
Check if "Muratec ***" is
installed.
Check if "Muratec ***" is
selected.
Check if the paper size or
direction you set in the
application software is given
priority.
Check if the memory
required for printing is suf-
ficient.
Check if the memory
required for printing is suf-
ficient.
Check if the spool settings
of the printer driver are
correct.
—
Check if each worksheet
in Microsoft Excel has
the same settings in "Page
Settings" and printer
driver settings.
Countermeasure
Otherwise, you cannot print a document
created with the specified application
software. Exit OfficeBridge and install
"Muratec ***".
From the print menu of the application
software, set the printer to "Muratec ***".
The settings in the application software
may be given priority to the ones in the
printer driver for printing. Configure
the correct settings on the application
software.
If trying to print multiple copies, try to
print one at a time.
Set the image resolution lower. Simplify
the image to decrease the file size.
Change the spool data format of the
printer driver from "EMF mode" to "RAW
mode".
Some functions may not be combined.
Areas displayed in gray cannot be
selected.
When you set some worksheets in
a workgroup in Microsoft Excel
and print them, you need the same
settings in both "Page Settings" and
"printer driver settings" for each
worksheet.
2007/04/27 10:18:16