Muratec MFX-1450 Software Manual page 134

Items
Attach File
Format
Insert Cover-
sheet (I-Fax)
or Subject/Text
(E-mail)
4-38 n
etwork
PC_Users_Guide.indb 38
Descriptions
Select whether to convert the documents into a "PDF", "TIFF-S"
or "TIFF" format when sending an e-mail.
• PDF
The document is converted into PDF format. However, a PDF
file can only be transmitted to an e-mail inbox.
• TIFF-S (ITU-T T.37 simple mode)
The document is converted into a TIFF format based on T.37
simple mode. T.37 is an international standard for Internet
faxing. When a document is sent in simple mode format, it can
be received normally by other Internet fax devices. However,
all attached documents are converted to A4 size and 200 dpi
resolution.
• TIFF (ITU-T T.37 full mode)
The document is converted into a TIFF format and is sent
at the original document size and resolution selected during
scanning.
"TIFF Image Encoding Method" sets the image encoding
method for sending documents with "TIFF". Select "MH",
"MR", "MMR", or "JBIG".
NOTE
• This setting is effective only for e-mail sent from the PC. For
the attached file format of e-mail sent from the machine, you
should set it using the machine's control panel.
• However, the "TIFF Image Encoding Method" setting is effec-
tive for both e-mail sent from PC and machine.
Select whether to attach the following subject line and text
message automatically into an e-mail, when these items are not
filled in by the user.
�ubje���: E-��i� Mess���e
Te����: This is �� e-��i� �ess���e�
P�e�se see ��he fi�e �������hed�
When "Insert text" is selected, you can also select whether to
add the sender information to the text.
The sender information can be stored in "SMTP/POP Server
Settings" dialog (see page 4-34).
NOTE
• This setting is effective only for e-mail sent from the PC.
However, "The sender information" setting is effective for both
e-mail sending from PC and machine.
c
onfiGuration
2007/04/27 10:18:02